Crassus - be smart. be a Problemlöser.

Geberit - Silent-PP

Unfortunately, you cannot purchase this item from us.

Crassus provides this piping system purely for informational purposes within the context of the Pipe Lexicon.

Dimension

Pipe end

Details
Matching connections

Material category	Plastic
RXNR	10-3-S
Designation	Geberit - Silent-PP
Manufacturer	Geberit
DN	40
Pipe end	Spigot
Material name	Polypropylene, PP-MD, PP-Copolymer
Color (exterior)	Black
Applications	HVAC/MEP Sector, Drainage

ID (mm)	36
OD (mm)	40
Wall thickness (mm)	2

The new Geberit waste water plug-in system Silent-PP is ideal for quick, economical and sound-optimized installation of house drainage. The Geberit Silent-PP drainage system can be used consistently in single and two-family houses as well as in multi-storey residential buildings, taking into account the building situation and the required noise levels.

The Geberit Silent-PP consists of robust, mineral-reinforced three-layer pipes. Due to their small size, they make it possible to install the entire sewage system without long sleeves. The high ring rigidity of the system pipes and the proven EPDM lip seals in the sleeves keep the sewage system reliably and permanently tight. Pipes and fittings can also be processed at low temperatures thanks to the cold-impact resistant materials. The high UV resistance also enables economical storage outdoors for a short time. All fittings have a 30 degree mark for quick and easy alignment. The correct insertion depth is indicated by a visual check via a simple stop

The system can be used both inside buildings and buried underground within the building structure (application code "BD" - Building / Drainage) based on DIN EN 1451-1. Silent-PP pipes and fittings are approved by the DIBt under the approval number Z-42.1-432. The system must not be subjected to pressure and therefore must not be used for roof drainage with pressure flow (Pluvia). Geberit Silent-PP may be used for internal rainwater pipes up to a maximum pressure load of 500 hPa (0.5 bar / 5 m geodetic height).

Areas of application

- Domestic sewage

- connecting cables

- Downpipes

- rainwater pipes

- ventilation ducts

- manifolds

- Cast-in pipes

Source: Geberit Vertriebs GmbH

Flexible pipe connections

Pipe Reducer CGA 36 | 32

up to 0.5 bar / 7.3 PSI

Pipe Reducer CGA 43 | 40

up to 0.5 bar / 7.3 PSI

Pipe Reducer CGA 45 | 40

up to 0.5 bar / 7.3 PSI

Pipe Reducer CGA 50 | 40

up to 0.5 bar / 7.3 PSI

Pipe Reducer CGA 83 | 40

up to 0.5 bar / 7.3 PSI

Multi Pipe Reducer CKA 50 | 40/32

50 mm | 40 / 32 mm

up to 0.5 bar / 7.3 PSI

Multi Pipe Reducer CKA 64/58 | 50/40

64 / 58 mm | 50 / 40 mm

up to 0.5 bar / 7.3 PSI

Multi Pipe Reducer CKA 75/70 | 50/40

75 / 70 mm | 50 / 40 mm

up to 0.5 bar / 7.3 PSI

Adaptor Coupling CAC 0401

32-40 mm | 24-32 mm

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 0431

38-43 mm | 30-35 mm

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 0501

40-50 mm | 24-32 mm

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 0562

48-56 mm | 38-43 mm

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 0633

53-64 mm | 40-50 mm

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 0682

60-68 mm | 38-43 mm

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 1201

105-120 mm | 35-42 mm

up to 0.6 bar / 8.7 PSI

Drain Coupling CDC 043

up to 0.6 bar / 8.7 PSI

Drain Coupling CDC 050

up to 0.6 bar / 8.7 PSI

Drain Coupling CDC 040

up to 0.6 bar / 8.7 PSI

Standard Coupling CDC 040 FKM

up to 0.6 bar / 8.7 PSI

Standard Coupling CDC 050 FKM

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 1152

100-115 mm | 40-50 mm

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 0893

75-90 mm | 40-50 mm

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 0651

50-65 mm | 35-42 mm

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 0502

40-50 mm | 32-40 mm

up to 0.6 bar / 8.7 PSI

Special products

Flexible Branch CFA 050 (40-50, 1 1/2'')

up to 0.6 bar / 8.7 PSI

Flexible Bend CFB 050 (90°, 40-50, 1 1/2")

up to 0.6 bar / 8.7 PSI

Outside End Cap CEC 045

up to 0.6 bar / 8.7 PSI

Inside End Cap CSV 40 PVC

up to 0.5 bar / 7.3 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.