Crassus - be smart. be a Problemlöser.

Material category	Concrete / Fiber Cement
RXNR	280-1-S
Designation	BERDING BETON - Concrete Pipe Optimal® PIPE B-KF-GM BL
Manufacturer	Berding Beton GmbH
DN	300
Pipe end	Spigot
Material name	Concrete
Color (exterior)	Gray
Applications	Civil Engineering

ID (mm)	300
OD (mm)	440
Wall thickness (mm)	70

Concrete Pipe Optimal® PIPE B-KF-GM BL

OPTIMAL® PIPE pipes are specifically designed for open installation. They are manufactured using a special process in which the concrete composition, form, and compaction are optimally coordinated.

Technical Advantages and Features:
•    High density and watertightness up to 1.0 bar
•    Very smooth surfaces with high hardness
•    Precise dimensional accuracy, especially at the connection points
•    Exact edge formation ensuring a secure fit of DYWIDAG seals for pipes from DN 1500
•    Uniform distribution of aggregate and concrete
•    No segregation of concrete and no excess water or cement residues
•    Optimized hydration process for improved concrete quality
•    Reinforcement is fixed precisely in the correct position
•    Demolding only occurs once the concrete has reached high compressive strength
•    Minimal porosity due to optimal compaction and a soft concrete mix
•    Very smooth surface with minimal rough areas
•    Excellent hydraulic properties
•    High degree of compaction
•    The concrete fully protects the reinforcement with a dense cement coating
•    Pipe lengths are optimally adapted to the load, depending on the pipe diameter and wall thickness

Note: All dimensions are approximate values for planning purposes and may vary depending on the production facility.

Source: www.berdingbeton.de

Flexible pipe connections

CRA16231

Standard Coupling CSC 445

420-445 mm

up to 2.5 bar / 36.3 PSI

CRA16232

Standard Coupling CSC 465

435-465 mm

up to 2.5 bar / 36.3 PSI

CRA16645

Standard Coupling CSC 450

425-450 mm

up to 2.5 bar / 36.3 PSI

CRA16646

Standard Coupling CSC 470

440-470 mm

up to 2.5 bar / 36.3 PSI

CRA16911

Standard Coupling CSC XL 445

420-445 mm

up to 2.5 bar / 36.3 PSI

CRA16912

Standard Coupling CSC XL 450

425-450 mm

up to 2.5 bar / 36.3 PSI

CRA16913

Standard Coupling CSC XL 465

435-465 mm

up to 2.5 bar / 36.3 PSI

CRA16914

Standard Coupling CSC XL 470

440-470 mm

up to 2.5 bar / 36.3 PSI

Special products

CRA18632

Inside End Cap CSV 300

298-315 mm | 1 mm

up to 0.5 bar / 7.3 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.