Crassus - be smart. be a Problemlöser.

Material category	Concrete / Fiber Cement
RXNR	281-1-S
Designation	BERDING BETON - Reinforced Concrete Pipe Optimal® PIPE SB-K-GM
Manufacturer	Berding Beton GmbH
DN	500
Pipe end	Spigot
Material name	Concrete
Color (exterior)	Gray
Applications	Civil Engineering

ID (mm)	500
OD (mm)	650
Wall thickness (mm)	75

Reinforced Concrete Pipe Optimal® PIPE SB-K-GM

OPTIMAL® PIPE pipes are specially designed for open installation. They are produced using a special process in which the concrete mixture, form, and compaction are optimally coordinated.

Technical advantages and features:

• High density and water tightness up to 1.0 bar
• Very smooth surfaces with high hardness
• Precise dimensional accuracy, especially at connection points
• Exact edge formation ensuring a secure fit of DYWIDAG seals for pipes from DN 1500
• Uniform distribution of aggregates and concrete
• No segregation of concrete and no excess water or cement residues
• Optimized hydration process for improved concrete quality
• Reinforcement is fixed precisely in the correct position
• Formwork removal only occurs when the concrete has reached high compressive strength
• Minimal porosity due to optimal compaction and soft concrete mix
• Very smooth surface with minimal rough spots
• Good hydraulic properties
• High degree of compaction
• Concrete fully protects the reinforcement with a dense cement coating
• Pipe lengths are optimized based on diameter and wall thickness to match load requirements

Note: All dimensions are approximate values for planning purposes and may vary depending on the manufacturing plant.

Source: www.berdingbeton.de

Flexible pipe connections

CRA16778

Standard Coupling CSC 650

635-650 mm

up to 2.5 bar / 36.3 PSI

CRA16779

Standard Coupling CSC 665

650-665 mm

up to 2.5 bar / 36.3 PSI

CRA16926

Standard Coupling CSC XL 650

635-650 mm

up to 2.5 bar / 36.3 PSI

CRA16927

Standard Coupling CSC XL 665

650-665 mm

up to 2.5 bar / 36.3 PSI

Special products

CRA18635

Inside End Cap CSV 500

495-520 mm | 2 mm

up to 0.5 bar / 7.3 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.