Crassus - be smart. be a Problemlöser.

Material category	Plastic
RXNR	263-1-S
Designation	Gerodur - GEROfit® R
Manufacturer	Gerodur MPM Kunststoffverarbeitung GmbH & Co. KG
DN	32
Pipe end	Spigot
Material name	Polyethylen PE100-RC
Color (exterior)	Yellow, Brown, Blue
Applications	Civil Engineering

ID (mm)	26
OD (mm)	34.9
Wall thickness (mm)	3

GEROfit® R - Pressure Pipe with Protective Sheath

The GEROfit® R pressure pipe has been specifically developed for cost-effective and time-saving installation using modern, alternative techniques. It can be installed both in open trenches without sand bedding and using trenchless methods such as horizontal directional drilling, pipe bursting, or relining. The combination of a PE100-RC core pipe for media transport and a protective outer sheath made of modified polyolefin compound ensures high resistance to mechanical stresses.
The tested product quality meets the requirements of renowned certifications, including DIN CERTCO and DVGW CERT, and complies with the standards DIN EN 12201 and DIN EN 1555. Additionally, the pipe is classified as a Type 3 system pipe according to PAS 1075, confirming its suitability for specialized installation methods.

Advantages and Features:
•    Long service life of at least 100 years
•    High resistance to mechanical stresses such as notches and scratches
•    Suitable for trenchless installation without sand bedding
•    High resistance to stress cracking for safe operation under point loads
•    Versatile connection options through various welding and plug-in techniques
•    Continuous quality control and certification in accordance with applicable standards
•    Protective sheath according to PAS 1075 Type 3 for enhanced safety and durability
•    Suitable for drinking water and gas applications, with additional monitoring in compliance with DVGW regulations

Source: www.gerodur.de

Flexible pipe connections

CRA12043

Adaptor Coupling CAC 0401

32-40 mm | 24-32 mm

up to 0.6 bar / 8.7 PSI

CRA12028

Adaptor Coupling CAC 0431

38-43 mm | 30-35 mm

up to 0.6 bar / 8.7 PSI

CRA14043

Drain Coupling CDC 035

30-35 mm

up to 0.6 bar / 8.7 PSI

CRA14047

Drain Coupling CDC 040

32-40 mm

up to 0.6 bar / 8.7 PSI

CRA14047FKM

Standard Coupling CDC 040 FKM

32-40 mm

up to 0.6 bar / 8.7 PSI

CRA12023

Adaptor Coupling CAC 0502

40-50 mm | 32-40 mm

up to 0.6 bar / 8.7 PSI

Special products

CRA15082

Flexible Branch CFA 038 (30-38, 1 1/4")

30-38 mm

up to 0.6 bar / 8.7 PSI

CRA15081

Flexible Bend CFB 038 (90°, 30-38, 1 1/4")

30-38 mm

up to 0.6 bar / 8.7 PSI

CRA15756

Outside End Cap CEC 036

28-36 mm

up to 0.6 bar / 8.7 PSI

CRA18645

Inside End Cap CSV 30 PVC

23-32 mm

up to 0.5 bar / 7.3 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.