Crassus - be smart. be a Problemlöser.

Material category	Plastic
RXNR	263-8-S
Designation	Gerodur - GEROfit® R
Manufacturer	Gerodur MPM Kunststoffverarbeitung GmbH & Co. KG
DN	125
Pipe end	Spigot
Material name	Polyethylen PE100-RC
Color (exterior)	Yellow, Brown, Blue
Applications	Civil Engineering

ID (mm)	102.2
OD (mm)	129.4
Wall thickness (mm)	11,4

GEROfit® R - Pressure Pipe with Protective Sheath

The GEROfit® R pressure pipe has been specifically developed for cost-effective and time-saving installation using modern, alternative techniques. It can be installed both in open trenches without sand bedding and using trenchless methods such as horizontal directional drilling, pipe bursting, or relining. The combination of a PE100-RC core pipe for media transport and a protective outer sheath made of modified polyolefin compound ensures high resistance to mechanical stresses.
The tested product quality meets the requirements of renowned certifications, including DIN CERTCO and DVGW CERT, and complies with the standards DIN EN 12201 and DIN EN 1555. Additionally, the pipe is classified as a Type 3 system pipe according to PAS 1075, confirming its suitability for specialized installation methods.

Advantages and Features:
•    Long service life of at least 100 years
•    High resistance to mechanical stresses such as notches and scratches
•    Suitable for trenchless installation without sand bedding
•    High resistance to stress cracking for safe operation under point loads
•    Versatile connection options through various welding and plug-in techniques
•    Continuous quality control and certification in accordance with applicable standards
•    Protective sheath according to PAS 1075 Type 3 for enhanced safety and durability
•    Suitable for drinking water and gas applications, with additional monitoring in compliance with DVGW regulations

Source: www.gerodur.de

Flexible pipe connections

CRA10017

Multi Pipe Reducer CKA 100-105 | 75/50

100-105 mm | 75 / 50 mm

up to 0.5 bar / 7.3 PSI

CRA10014

Multi Pipe Reducer CKA 100-105 | 90/75

100-105 mm | 90 / 75 mm

up to 0.5 bar / 7.3 PSI

CRA11020

Plug Adaptor CSA 100

100-116 mm | 100-105 mm

up to 0.5 bar / 7.3 PSI

CRA11021

Plug Adaptor CSA 125

120-141 mm | 117-127 mm

up to 0.5 bar / 7.3 PSI

CRA12056

Adaptor Coupling CAC 1361

121-136 mm | 80-95 mm

up to 0.6 bar / 8.7 PSI

CRA12057

Adaptor Coupling CAC 1362

121-136 mm | 100-116 mm

up to 0.6 bar / 8.7 PSI

CRA12033

Adaptor Coupling CAC 4000

121-136 mm | 110-121 mm

up to 0.6 bar / 8.7 PSI

CRA12063

Adaptor Coupling CAC 1603

144-160 mm | 121-136 mm

up to 0.6 bar / 8.7 PSI

CRA17416

Adaptor Coupling CAC 1923

170-192 mm | 121-136 mm

up to 0.6 bar / 8.7 PSI

CRA17185

Adaptor Coupling CAC 2353

210-235 mm | 121-136 mm

up to 0.6 bar / 8.7 PSI

CRA14030

Drain Coupling CDC 137

120-137 mm

up to 0.6 bar / 8.7 PSI

CRA14039

Standard Coupling CSC 137

120-137 mm

up to 2.5 bar / 36.3 PSI

CRA12033FKM

Adaptor Coupling CAC 4000 FKM

121-136 mm | 110-121 mm

up to 0.6 bar / 8.7 PSI

CRA12057FKM

Adaptor Coupling CAC 1362 FKM

121-136 mm | 100-115 mm

up to 0.6 bar / 8.7 PSI

CRA12063FKM

Adaptor Coupling CAC 1603 FKM

144-160 mm | 121-136 mm

up to 0.6 bar / 8.7 PSI

CRA17416FKM

Adaptor Coupling CAC 1923 FKM

170-192 mm | 121-136 mm

up to 0.6 bar / 8.7 PSI

CRA14039FKM

Standard Coupling CSC 137 FKM

120-137 mm

up to 2.5 bar / 36.3 PSI

Special products

CRA15078

Outside End Cap CEC 135

125-135 mm

up to 0.6 bar / 8.7 PSI

CRA18624

Inside End Cap CSV 100

94-110 mm | 1/2 mm

up to 0.5 bar / 7.3 PSI

CRA18641

Inside End Cap CSV 100 PVC

95-110 mm | 1/2 mm

up to 0.5 bar / 7.3 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.