Article group | Modular Seal DWA |
Item number | CRA21380 |
EAN / GTIN | 4260391375651 |
Designation | Modular Seal Type CS GK-200, KTW |
Product description | Press seal in modular design; for the installation in core drill holes or wall sleeves; water-tight feed-through for pipes/cables; single sealing; against pressing water and non-pressing water; modular design ideal for subsequent installation; according to the area of application there are different elastomer and steel qualities available |
Against pressing water and non-pressing water
Modular design ideal for subsequent installation
100% gas-, odor- and waterproof
Pressure plates with rotation prevention
In different material versions available
All products in 48h producible
Proof of pressure-tightness
|
R | Annular gap | 12.5-15.9 mm |
M | Media pipe | 21.3-323.9 mm |
B | Thickness | 40 mm |
![]() |
Pressure density | 5,0 bar |
Tightening torque | 3.0 Nm |
Weight | 0.022 kg |
MPA |
Heat resistant | 120 °C |
Cold resistant | -40 °C |
UV resistant | |
Suitable for soil | |
Flush-mounting suited |
![]() |
EPDM (KTW)
Ethylene propylene diene monomer (EPDM). EPDM exhibit outstanding resistance to heat, ozone, steam and weather. It is used for sealing parts by virtue of high elasticity and good chemical resistance. The material has a german KTW approval.
|
![]() |
PVC (blue)
Polyvinyl chloride (PVC) is a thermoplastic polymer that is produced from the monomer vinyl chloride by chain polymerization. PVC is resistant to acids, alkalis, alcohol, oil and petrol.
|
![]() |
Stainless steel (AISI 304)
V2A (1.4301, AISI 304) is an austenitic, acid-resistant 18/10 Cr-Ni steel that is intergranularly resistant even after welding without subsequent heat treatment due to its low carbon content.
|
Download datasheet |
|
|
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |