Press Seal Sealing Flange-D
Custom made
Outside diameter
Pipes / Cables Ø OD (custom-made)
Product information
Article group Press Seal Sealing Flange-D
Item number CRA22707 Custom made
EAN / GTIN 4260182348352
Designation Press Seal Flange (splitted) DN 80, 0-40mm
Product description Split penetration with integrated film flange for subsequent sealing of utilities (pipes, cables, etc.) of any materials in front of a wall; against pressurized and non-pressurized water; split design; with oil- and bitumen-resistant film flange (approximately 15cm all around), based on DIN 16937; according to DIN 18533 W1-E and W2.1-E
Dimensioning
A | Outer diameter 80 mm
M | Media pipe 0-40 mm
L | Length 30 mm
Specification
Pressure density 2.5 bar
Weight 0.6 kg
Testing / Approval
MPA
Resistances
UV resistant
Suitable for soil
Flush-mounting suited
Material
EPDM
Ethylene Propylene Diene Rubber (EPDM) is a synthetic rubber. The saturated backbone structure results in properties such as high UV and weather resistance, as well as high thermal resistance.
Stainless steel (AISI 304)
V2A (1.4301, AISI 304) is an austenitic, acid-resistant 18/10 Cr-Ni steel that is intergranularly resistant even after welding without subsequent heat treatment due to its low carbon content.
PVC (black)
Polyvinyl chloride (PVC) is a thermoplastic polymer that is produced from the monomer vinyl chloride by chain polymerization. PVC is resistant to acids, alkalis, alcohol, oil and petrol.
Suitable for all media pipes and cables
The Press Seal is suitable for all media pipes and cables (in the respective diameter and under considering the respective specification).
Improved stability through welded-on bolts
Our Press Seals are extremely robust because the bolts are not pushed through but welded directly onto the main plate.
Oil- and bitumen-resistant foil flange
Oil- and bitumen-resistant foil flange (circumferential 15 cm), to seal up wall penetrations in accordance with DIN 18195-T9
Gas, odor, and water tight
The seal is both gas, odor, and water tight.
Against pressing water
The product is resistant to pressing and non-pressing water.
UV, ozone and weather resistant.
The product is UV and ozone resistant as well as suitable for all weather conditions.
Suitable for flush-mounting.
The product is suitable for concealed installation (flush-mounting).
Suitable for soil.
The product is suitable for installation in the ground.
Digital product and function overview.
This product has a scannable QR code to call up all relevant product information and functions.
Step 1/4
Step 2/4
Step 3/4
Step 4/4
Installation
Downloads for the product
Data Sheet
Tender texts for planners