Press Seal Sealing Flange
Outside diameter
Pipes / Cables Ø OD (custom-made)
Product information
Product group Press Seal Sealing Flange
Item number CRA22700 Custom-made
EAN / GTIN 4260182348284
Product name Press Seal Sealing Flange, DN 80 for pipes/cables 0-40 mm
Product description Custom-made press seal with freely selectable sizes of pipe/cable diameter; installation direct on the wall; water-tight feed-through for pipes/cables; against pressing water and non-pressing water; with oil- and bitumen-resistant foil flange (circumferential 15 cm), referring to DIN 16937
Water-tight welded bolts for an optimum of steadiness and corrosion protection
Against pressing water and non-pressing
In different material versions available
100% gas-, odor- and waterproof
Oil- and bitumen-resistant foil flange
All products in 48h producible
Proof of pressure-tightness
A | Outside-diameter 80 mm
MDa | MDa | Pipe ø 0-40 mm
L | Seal 30 mm
Pressure tightness 2.5 bar
Weight 0.6 kg
UV resistant
Suitable for soil
Flush-mounting suited
Ethylene propylene diene monomer (EPDM). EPDM exhibit outstanding resistance to heat, ozone, steam and weather. It is used for sealing parts by virtue of high elasticity and good chemical resistance.
Stainless steel (AISI 304)
V2A (1.4301, AISI 304) is an austenitic, acid-resistant 18/10 Cr-Ni steel which, thanks to its low carbon content, is intercrystalline resistant after welding even without subsequent heat treatment.
PVC (black)
Polyvinyl chloride (PVC) is a thermoplastic polymer that is produced from the monomer vinyl chloride by chain polymerization. PVC is resistant to acids, alkalis, alcohol, oil and petrol.
Suitable for all media pipes and cables
The Press Seal is suitable for all media pipes and cables (in the respective diameter and under considering the respective specification).
Improved stability through welded-on bolts
Our Press Seals are extremely robust because the bolts are not pushed through but welded directly onto the main plate.
Oil- and bitumen-resistant foil flange
Oil- and bitumen-resistant foil flange (circumferential 15 cm), to seal up wall penetrations in accordance with DIN 18195-T9
Gas, odor and waterproof
The product is gas, odor and waterproof.
Against pressing water
The product is resistant to pressing and non-pressing water.
UV, ozone and weather resistant.
The product is UV and ozone resistant as well as suitable for all weather conditions.
Suitable for flush-mounting.
The product is suitable for concealed installation (flush-mounting).
Suitable for soil.
The product is suitable for installation in the ground.
Digital product and function overview.
This product has a scannable QR code to call up all relevant product information and functions.
Schritt 1/4
Schmutz, Tropfwasser und Reste von alten Abdichtungen entfernen. Folienflansch anzeichnen (Markierstift). Den Crassus PU50 Dichtklebstoff auftragen und mit einem Spachtel vollflächig verstreichen.
Schritt 2/4
Folienklemmflansch über das Rohr schieben.
Schritt 3/4
Den Folienflansch mit der Andrückrolle gleichmäßig von innen nach außen anpressen.
Schritt 4/4
Achte beim Anziehen der Schrauben darauf, dass immer zwei diagonal gegenüberliegende Muttern nacheinander angezogen werden.
Downloads for the product
Download data sheet
Tender texts for planners