Crassus - be smart. be a Problemlöser.

Geberit - PE-HD

Unfortunately, you cannot purchase this item from us.

Crassus provides this piping system purely for informational purposes within the context of the Pipe Lexicon.

Dimension

Pipe end

Details
Matching connections

Material category	Plastic
RXNR	9-2-S
Designation	Geberit - PE-HD
Manufacturer	Geberit
DN	40
Pipe end	Spigot
Material name	Polyethylen with high density (PE-HD)
Color (exterior)	Black
Applications	Industry, Civil Engineering, HVAC/MEP Sector, Drainage, Bridges

ID (mm)	34
OD (mm)	40
Wall thickness (mm)	3

Geberit PE drainage system is suitable for a large number of areas of application in roof drainage, in industry, in trade or laboratories, for burial, in concrete or in bridge structures. They are made of the robust pipe material polyethylene with high density (PE-HD). Hot water up to 80 ° C, briefly and without mechanical stress even up to 100 ° C, does not attack the material. It is resistant to around 95% of all commercially available alkalis, acids and chemicals. The pipes and fittings also withstand vibrations, subsidence, impacts or brief pressures of up to 150 kPa (1.5 bar) DN 30-150 without breaking or permanent deformation. The material used, polyethylene, is environmentally friendly and completely recyclable. No toxic emissions are produced during processing or in the event of a fire.

Geberit PE pipes are available in dimensions from DN 30 to DN 300 and with a wide range of fittings. Geberit PE pipes and fittings made of polyethylene meet the requirements of DIN EN 12056 in conjunction with DIN 1986-100, as well as DIN EN 752. The Geberit PE drainage system is for installation inside buildings in accordance with DIN 19535 and DIN EN 1519 and for underground pipes in accordance with DIN EN 12 666-1 approved. Geberit is adapting the designation of the pipe diameter to the requirements of the EN standards. In the past, the nominal diameter DN was used to denote the inner diameter of the pipes. According to the standard, the new nominal size DN approximates the outside diameter of the pipes and fittings.

Material: PE-HD

Linear expansion coefficient: 0.17 mm / (m K)

Absorption of linear expansion: Requires long socket

Installation temperature: -20 to 40 ° C

Application temperature continuous load: -20 to 80 ° C

Chemical resistance: 95% of all commercially available alkalis, acids and chemicals

Source: Geberit Vertriebs GmbH

Flexible pipe connections

Pipe Reducer CGA 43 | 40

up to 0.5 bar / 7.3 PSI

Pipe Reducer CGA 45 | 40

up to 0.5 bar / 7.3 PSI

Pipe Reducer CGA 50 | 40

up to 0.5 bar / 7.3 PSI

Pipe Reducer CGA 83 | 40

up to 0.5 bar / 7.3 PSI

Multi Pipe Reducer CKA 50 | 40/32

50 mm | 40 / 32 mm

up to 0.5 bar / 7.3 PSI

Multi Pipe Reducer CKA 64/58 | 50/40

64 / 58 mm | 50 / 40 mm

up to 0.5 bar / 7.3 PSI

Multi Pipe Reducer CKA 75/70 | 50/40

75 / 70 mm | 50 / 40 mm

up to 0.5 bar / 7.3 PSI

Adaptor Coupling CAC 0401

32-40 mm | 24-32 mm

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 0431

38-43 mm | 30-35 mm

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 0501

40-50 mm | 24-32 mm

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 0562

48-56 mm | 38-43 mm

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 0633

53-64 mm | 40-50 mm

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 0682

60-68 mm | 38-43 mm

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 1201

105-120 mm | 35-42 mm

up to 0.6 bar / 8.7 PSI

Drain Coupling CDC 043

up to 0.6 bar / 8.7 PSI

Drain Coupling CDC 050

up to 0.6 bar / 8.7 PSI

Drain Coupling CDC 040

up to 0.6 bar / 8.7 PSI

Standard Coupling CDC 040 FKM

up to 0.6 bar / 8.7 PSI

Standard Coupling CDC 050 FKM

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 1152

100-115 mm | 40-50 mm

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 0893

75-90 mm | 40-50 mm

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 0651

50-65 mm | 35-42 mm

up to 0.6 bar / 8.7 PSI

Adaptor Coupling CAC 0502

40-50 mm | 32-40 mm

up to 0.6 bar / 8.7 PSI

Special products

Flexible Branch CFA 050 (40-50, 1 1/2'')

up to 0.6 bar / 8.7 PSI

Flexible Bend CFB 050 (90°, 40-50, 1 1/2")

up to 0.6 bar / 8.7 PSI

Outside End Cap CEC 045

up to 0.6 bar / 8.7 PSI

Inside End Cap CSV 40 PVC

up to 0.5 bar / 7.3 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.