Geberit - Silent-PP
Unfortunately, you cannot purchase this item from us.
Crassus provides this piping system purely for informational purposes within the context of the Pipe Lexicon.

Dimension
Pipe end
Properties
Material category Plastic
RXNR 10-11-S
Designation Geberit - Silent-PP
Manufacturer Geberit
DN 100
Pipe end Spigot
Material name Polypropylene, PP-MD, PP-Copolymer
Color (exterior) Black
Applications HVAC/MEP Sector, Drainage
Dimensioning
ID (mm) 102.8
OD (mm) 110
Wall thickness (mm) 3.6
Description

The new Geberit waste water plug-in system Silent-PP is ideal for quick, economical and sound-optimized installation of house drainage. The Geberit Silent-PP drainage system can be used consistently in single and two-family houses as well as in multi-storey residential buildings, taking into account the building situation and the required noise levels.

The Geberit Silent-PP consists of robust, mineral-reinforced three-layer pipes. Due to their small size, they make it possible to install the entire sewage system without long sleeves. The high ring rigidity of the system pipes and the proven EPDM lip seals in the sleeves keep the sewage system reliably and permanently tight. Pipes and fittings can also be processed at low temperatures thanks to the cold-impact resistant materials. The high UV resistance also enables economical storage outdoors for a short time. All fittings have a 30 degree mark for quick and easy alignment. The correct insertion depth is indicated by a visual check via a simple stop

The system can be used both inside buildings and buried underground within the building structure (application code "BD" - Building / Drainage) based on DIN EN 1451-1. Silent-PP pipes and fittings are approved by the DIBt under the approval number Z-42.1-432. The system must not be subjected to pressure and therefore must not be used for roof drainage with pressure flow (Pluvia). Geberit Silent-PP may be used for internal rainwater pipes up to a maximum pressure load of 500 hPa (0.5 bar / 5 m geodetic height).

Areas of application

- Domestic sewage

- connecting cables

- Downpipes

- rainwater pipes

- ventilation ducts

- manifolds

- Cast-in pipes

Source: Geberit Vertriebs GmbH

Flexible pipe connections
CRA10087
Pipe Reducer CGA 123 | 110
123 mm | 110 mm
up to 0.5 bar / 7.3 PSI
CRA10006
Pipe Reducer CGA 150 | 110
150 mm | 110 mm
up to 0.5 bar / 7.3 PSI
CRA10017
Multi Pipe Reducer CKA 100-105 | 75/50
100-105 mm | 75 / 50 mm
up to 0.5 bar / 7.3 PSI
CRA10014
Multi Pipe Reducer CKA 100-105 | 90/75
100-105 mm | 90 / 75 mm
up to 0.5 bar / 7.3 PSI
CRA10015
Multi Pipe Reducer CKA 123-130 | 110/75
123-130 mm | 110 / 75 mm
up to 0.5 bar / 7.3 PSI
CRA10107
Multi Pipe Reducer CKA 150/125 | 110
150 / 125 mm | 110 mm
up to 0.5 bar / 7.3 PSI
CRA11020
Plug Adaptor CSA 100
100-116 mm | 100-105 mm
up to 0.5 bar / 7.3 PSI
CRA12052
Adaptor Coupling CAC 1155
100-116 mm | 75-90 mm
up to 0.6 bar / 8.7 PSI
CRA12039
Adaptor Coupling CAC 1201
105-120 mm | 35-42 mm
up to 0.6 bar / 8.7 PSI
CRA12041
Adaptor Coupling CAC 1225
110-122 mm | 48-56 mm
up to 0.6 bar / 8.7 PSI
CRA12042
Adaptor Coupling CAC 1226
110-122 mm | 60-68 mm
up to 0.6 bar / 8.7 PSI
CRA12040
Adaptor Coupling CAC 1221
110-122 mm | 80-95 mm
up to 0.6 bar / 8.7 PSI
CRA12054
Adaptor Coupling CAC 1252
110-125 mm | 100-116 mm
up to 0.6 bar / 8.7 PSI
CRA12057
Adaptor Coupling CAC 1362
121-136 mm | 100-116 mm
up to 0.6 bar / 8.7 PSI
CRA12033
Adaptor Coupling CAC 4000
121-136 mm | 110-121 mm
up to 0.6 bar / 8.7 PSI
CRA12060
Adaptor Coupling CAC 1452
130-145 mm | 110-125 mm
up to 0.6 bar / 8.7 PSI
CRA12062
Adaptor Coupling CAC 1602
144-160 mm | 110-122 mm
up to 0.6 bar / 8.7 PSI
CRA12065
Adaptor Coupling CAC 1702
155-170 mm | 110-125 mm
up to 0.6 bar / 8.7 PSI
CRA17415
Adaptor Coupling CAC 1922
170-192 mm | 110-122 mm
up to 0.6 bar / 8.7 PSI
CRA17418
Adaptor Coupling CAC 1991
185-210 mm | 100-115 mm
up to 0.6 bar / 8.7 PSI
CRA17426
Adaptor Coupling CAC 2152
195-215 mm | 100-115 mm
up to 0.6 bar / 8.7 PSI
CRA17184
Adaptor Coupling CAC 2352
210-235 mm | 110-122 mm
up to 0.6 bar / 8.7 PSI
CRA11018
Drain Coupling CDC 100
100-116 mm
up to 0.6 bar / 8.7 PSI
CRA14029
Drain Coupling CDC 125
110-125 mm
up to 0.6 bar / 8.7 PSI
CRA14037
Standard Coupling CSC 116
100-116 mm
up to 2.5 bar / 36.3 PSI
CRA14038
Standard Coupling CSC 121
110-121 mm
up to 2.5 bar / 36.3 PSI
CRA14109
Standard Coupling CSC 125
110-125 mm
up to 2.5 bar / 36.3 PSI
CRA12033FKM
Adaptor Coupling CAC 4000 FKM
121-136 mm | 110-121 mm
up to 0.6 bar / 8.7 PSI
CRA12041FKM
Adaptor Coupling CAC 1225 FKM
110-122 mm | 48-56 mm
up to 0.6 bar / 8.7 PSI
CRA12040FKM
Adaptor Coupling CAC 1221 FKM
110-122 mm | 80-95 mm
up to 0.6 bar / 8.7 PSI
CRA12054FKM
Adaptor Coupling CAC 1252 FKM
110-125 mm | 100-115 mm
up to 0.6 bar / 8.7 PSI
CRA12057FKM
Adaptor Coupling CAC 1362 FKM
121-136 mm | 100-115 mm
up to 0.6 bar / 8.7 PSI
CRA12062FKM
Adaptor Coupling CAC 1602 FKM
144-160 mm | 110-122 mm
up to 0.6 bar / 8.7 PSI
CRA17415FKM
Adaptor Coupling CAC 1922 FKM
170-192 mm | 110-122 mm
up to 0.6 bar / 8.7 PSI
CRA14028FKM
Standard Coupling CDC 115 FKM
100-115 mm
up to 0.6 bar / 8.7 PSI
CRA14037FKM
Standard Coupling CSC 115 FKM
100-115 mm
up to 2.5 bar / 36.3 PSI
CRA12037
Adaptor Coupling CAC 1153
100-115 mm | 50-64 mm
up to 0.6 bar / 8.7 PSI
CRA12034
Adaptor Coupling CAC 1152
100-115 mm | 40-50 mm
up to 0.6 bar / 8.7 PSI
CRA14109FKM
Standard Coupling CSC 125 FKM
110-125 mm
up to 2.5 bar / 36.3 PSI
CRA17422
Adaptor Coupling CAC 2002
185-210 mm | 110-125 mm
up to 0.6 bar / 8.7 PSI
Special products
CRA15073
Flexible Branch CFA 118 (106-118, 4'')
106-118 mm
up to 0.6 bar / 8.7 PSI
CRA15069
Flexible Bend CFB 118 (90°, 106-118, 4'')
106-118 mm
up to 0.6 bar / 8.7 PSI
CRA15077
Outside End Cap CEC 115
105-115 mm
up to 0.6 bar / 8.7 PSI
CRA18624
Inside End Cap CSV 100
94-110 mm | 1/2 mm
up to 0.5 bar / 7.3 PSI
CRA18641
Inside End Cap CSV 100 PVC
95-110 mm | 1/2 mm
up to 0.5 bar / 7.3 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.