Crassus - be smart. be a Problemlöser.

Material category	Plastic
RXNR	9-6-S
Designation	Geberit - PE-HD
Manufacturer	Geberit
DN	90
Pipe end	Spigot
Material name	Polyethylen with high density (PE-HD)
Color (exterior)	Black
Applications	Industry, Civil Engineering, HVAC/MEP Sector, Drainage, Bridges

ID (mm)	83
OD (mm)	90
Wall thickness (mm)	3.5

Geberit PE drainage system is suitable for a large number of areas of application in roof drainage, in industry, in trade or laboratories, for burial, in concrete or in bridge structures. They are made of the robust pipe material polyethylene with high density (PE-HD). Hot water up to 80 ° C, briefly and without mechanical stress even up to 100 ° C, does not attack the material. It is resistant to around 95% of all commercially available alkalis, acids and chemicals. The pipes and fittings also withstand vibrations, subsidence, impacts or brief pressures of up to 150 kPa (1.5 bar) DN 30-150 without breaking or permanent deformation. The material used, polyethylene, is environmentally friendly and completely recyclable. No toxic emissions are produced during processing or in the event of a fire.

Geberit PE pipes are available in dimensions from DN 30 to DN 300 and with a wide range of fittings. Geberit PE pipes and fittings made of polyethylene meet the requirements of DIN EN 12056 in conjunction with DIN 1986-100, as well as DIN EN 752. The Geberit PE drainage system is for installation inside buildings in accordance with DIN 19535 and DIN EN 1519 and for underground pipes in accordance with DIN EN 12 666-1 approved. Geberit is adapting the designation of the pipe diameter to the requirements of the EN standards. In the past, the nominal diameter DN was used to denote the inner diameter of the pipes. According to the standard, the new nominal size DN approximates the outside diameter of the pipes and fittings.

Material: PE-HD

Linear expansion coefficient: 0.17 mm / (m K)

Absorption of linear expansion: Requires long socket

Installation temperature: -20 to 40 ° C

Application temperature continuous load: -20 to 80 ° C

Chemical resistance: 95% of all commercially available alkalis, acids and chemicals

Source: Geberit Vertriebs GmbH

Flexible pipe connections

CRA10095

Pipe Reducer CGA 83 | 40

83 mm | 40 mm

up to 0.5 bar / 7.3 PSI

CRA10096

Pipe Reducer CGA 83 | 50

83 mm | 50 mm

up to 0.5 bar / 7.3 PSI

CRA10097

Pipe Reducer CGA 83 | 75

83 mm | 75 mm

up to 0.5 bar / 7.3 PSI

CRA10085

Pipe Reducer CGA 105 | 90

105 mm | 90 mm

up to 0.5 bar / 7.3 PSI

CRA10016

Multi Pipe Reducer CKA 96/83 | 75/50

96 / 83 mm | 75 / 50 mm

up to 0.5 bar / 7.3 PSI

CRA10014

Multi Pipe Reducer CKA 100-105 | 90/75

100-105 mm | 90 / 75 mm

up to 0.5 bar / 7.3 PSI

CRA11017

Plug Adaptor CSA 070

69-75 mm | 73-85 mm

up to 0.5 bar / 7.3 PSI

CRA10009

Pipe Reducer CMA 110 | 90 (Black)

110 mm | 90 mm

up to 0.5 bar / 7.3 PSI

CRA12049

Adaptor Coupling CAC 0894

75-90 mm | 53-64 mm

up to 0.6 bar / 8.7 PSI

CRA12031

Adaptor Coupling CAC 0923

82-92 mm | 48-56 mm

up to 0.6 bar / 8.7 PSI

CRA12032

Adaptor Coupling CAC 0924

82-92 mm | 60-68 mm

up to 0.6 bar / 8.7 PSI

CRA12052

Adaptor Coupling CAC 1155

100-116 mm | 75-90 mm

up to 0.6 bar / 8.7 PSI

CRA12040

Adaptor Coupling CAC 1221

110-122 mm | 80-95 mm

up to 0.6 bar / 8.7 PSI

CRA12056

Adaptor Coupling CAC 1361

121-136 mm | 80-95 mm

up to 0.6 bar / 8.7 PSI

CRA14027

Drain Coupling CDC 095

80-95 mm

up to 0.6 bar / 8.7 PSI

CRA14036

Standard Coupling CSC 095

80-95 mm

up to 2.5 bar / 36.3 PSI

CRA11022

Plug Adaptor CSA 090

73-90 mm | 79-86 mm

up to 0.5 bar / 7.3 PSI

CRA12040FKM

Adaptor Coupling CAC 1221 FKM

110-122 mm | 80-95 mm

up to 0.6 bar / 8.7 PSI

CRA14027FKM

Standard Coupling CDC 095 FKM

80-95 mm

up to 0.6 bar / 8.7 PSI

CRA12026

Adaptor Coupling CAC 0893

75-90 mm | 40-50 mm

up to 0.6 bar / 8.7 PSI

CRA14057

Drain Coupling CDC 098

85-100 mm

up to 0.6 bar / 8.7 PSI

CRA14058

Standard Coupling CSC 098

85-100 mm

up to 2.5 bar / 36.3 PSI

CRA14036FKM

Standard Coupling CSC 095 FKM

80-95 mm

up to 2.5 bar / 36.3 PSI

Special products

CRA15072

Flexible Branch CFA 090 (78-90, 3'')

78-90 mm

up to 0.6 bar / 8.7 PSI

CRA15068

Flexible Bend CFB 090 (90°, 78-90, 3'')

78-90 mm

up to 0.6 bar / 8.7 PSI

CRA15076

Outside End Cap CEC 092

82-92 mm

up to 0.6 bar / 8.7 PSI

CRA18639

Inside End Cap CSV 80 PVC

70-87 mm | 1/2 mm

up to 0.5 bar / 7.3 PSI

CRA18640

Inside End Cap CSV 90 PVC

83-97 mm | 1/2 mm

up to 0.5 bar / 7.3 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.