Alphacan Omniplast - Primus HL SN12 (Rainwater)
Produktbild
Unfortunately, you cannot purchase this item from us.
Crassus provides this piping system purely for informational purposes within the context of the Pipe Lexicon.

Dimension
Pipe end
Properties
Material category Plastic
RXNR 26-7-S
Designation Alphacan Omniplast - Primus HL SN12 (Rainwater)
Manufacturer Omniplast
DN 250
Pipe end Spigot
Material name Hard-PVC (PVC-U)
Color (exterior) Blue
Applications Civil Engineering, Drainage, HVAC/MEP Sector
Dimensioning
ID (mm) 235
OD (mm) 250
Description

The philosophy of Alphacan Omniplast is to manufacture ready-to-install pipe systems that are smooth inside and out, which can be easily and easily assembled, filled and compacted into a pipeline. Thanks to its high ring stiffness (≥ 12 kN / m²) and longitudinal stiffness and the molded socket, the Primus HL SN 12 pipe system offers extraordinary stability and security with very good assembly capability and simple installation properties. Due to the clear color separation, sewage pipes in clay-brown and rainwater pipes in blue, it is easy to distinguish between sewage and rainwater even after decades of inspection.

PRIMUS HL SN 12 is the full wall high load sewer pipe system according to the standard of the oldest plastic pipe producer in Germany. Due to the complete fulfillment of all requirements of DIN EN 1401-1, Primus HL SN 12 has unlimited building authority approval. As a technically mature standard material in civil engineering, PVC-U has an extraordinarily high chemical resistance and is not attacked by any of the substances that may occur in wastewater.

The material:

Through the consistent use of the highest quality PVC new material and the production-technical know-how of the oldest plastic pipe producer in Germany, the ring stiffness of ≥ 12 kN / m² according to ISO 9969 for all components of the solid wall sewer pipe system Primus HL SN 12 was achieved through an independent technical solution. The material parameters were decidedly improved, but the required amount of material was not increased. Compared to a standard PVC material, for example, the E-module of the Primus HL SN 12 has been increased from around 3000 N / mm² to well over 4000 N / mm²! This significant material improvement in connection with the low creep factor also achieved the corresponding long-term ring stiffness according to DIN 16961. Should any repair work arise, you can fall back on the inexpensive and flexible Crassus range, which is known for its interior and exterior solutions.

Chemical resistance:

As a technically mature standard material in civil engineering, PVC-U has an extraordinarily high chemical resistance and is not attacked by any of the substances that may occur in wastewater. Any biogenic sulfuric acid, mineral oils, fats and fuels that may develop, but also other chemicals such as acids or alkalis, do not damage PVC-U, unlike other known pipe materials.

Connection option to other sewage systems:

Crassus hose adapters, Crassus combi adapters, Crassus adapter couplings, Crassus rubber adapters as well as bends, branches, Crassus end caps and much more.

Pipe repair:

Crassus Pipe Doctor and Crassus Pipe Plaster

Source: Omniplast, Crassus

Flexible pipe connections
CRA17189
Adaptor Coupling CAC 2654
240-265 mm | 144-160 mm
up to 0.6 bar / 8.7 PSI
CRA17190
Adaptor Coupling CAC 2655
240-265 mm | 170-192 mm
up to 0.6 bar / 8.7 PSI
CRA17191
Adaptor Coupling CAC 2656
240-265 mm | 190-215 mm
up to 0.6 bar / 8.7 PSI
CRA17193
Adaptor Coupling CAC 2657
240-265 mm | 210-235 mm
up to 0.6 bar / 8.7 PSI
CRA17194
Adaptor Coupling CAC 2754
250-275 mm | 160-175 mm
up to 0.6 bar / 8.7 PSI
CRA17195
Adaptor Coupling CAC 2756
250-275 mm | 200-225 mm
up to 0.6 bar / 8.7 PSI
CRA17037
Adaptor Coupling CAC 2250
260-285 mm | 240-250 mm
up to 0.6 bar / 8.7 PSI
CRA17198
Adaptor Coupling CAC 2908
265-290 mm | 235-260 mm
up to 0.6 bar / 8.7 PSI
CRA17207
Adaptor Coupling CAC 3208
295-320 mm | 240-265 mm
up to 0.6 bar / 8.7 PSI
CRA17210
Adaptor Coupling CAC 3608
335-360 mm | 240-265 mm
up to 0.6 bar / 8.7 PSI
CRA17213
Adaptor Coupling CAC 3858
360-385 mm | 240-265 mm
up to 0.6 bar / 8.7 PSI
CRA17228
Adaptor Coupling CAC 4208
395-420 mm | 240-265 mm
up to 0.6 bar / 8.7 PSI
CRA16644
Drain Coupling CDC 250
235-250 mm
up to 0.6 bar / 8.7 PSI
CRA16145
Drain Coupling CDC 265
250-265 mm
up to 0.6 bar / 8.7 PSI
CRA16110
Standard Coupling CSC 265
240-265 mm
up to 2.5 bar / 36.3 PSI
CRA16220
Standard Coupling CSC 250
225-250 mm
up to 2.5 bar / 36.3 PSI
CRA16221
Standard Coupling CSC 275
250-275 mm
up to 2.5 bar / 36.3 PSI
CRA16110FKM
Standard Coupling CSC 265 FKM
240-265 mm
up to 2.5 bar / 36.3 PSI
CRA16220FKM
Standard Coupling CSC 250 FKM
225-250 mm
up to 2.5 bar / 36.3 PSI
CRA16221FKM
Standard Coupling CSC 275 FKM
250-275 mm
up to 2.5 bar / 36.3 PSI
Special products
CRA15767
Outside End Cap CEC 250
235-250 mm
up to 0.6 bar / 8.7 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.