Crassus - be smart. be a Problemlöser.

Material category	Plastic
RXNR	284-6-S
Designation	Ostendorf - KG2000 e-line Cable Protection Pipe, SN10
Manufacturer	Ostendorf
DN	315
Pipe end	Spigot
Material name	Polypropylen PP-MD
Color (exterior)	Red
Applications	Kabelschutz

OD (mm)

315

KG2000 e-line Cable Protection Pipe, SN10

The KG2000 e-line is a plastic pipe system made of PP-MD designed for the protection of buried high- and extra-high-voltage cables up to 525 kV in accordance with DIN 16878. It consists of solid-wall pipes according to DIN EN 14758-1 and is available in stiffness classes SN 4, SN 10, and SN 16. The pipe system is optimized for underground installation and is particularly suitable for high- and extra-high-voltage cables. Thanks to its stable material properties, it allows for easy handling, as 6-meter pipe sections can be installed with minimal personnel effort and without additional equipment.

Technical advantages and features:

• Material: PP-MD (Polypropylene-Mineral Reinforced)
• Outer color: Fire Red (RAL 3000), Inner color: Traffic White (RAL 9016)
• Dimensions: DN/OD 110 – 630 mm
• Temperature resistance: Up to 80 °C
• Lifespan: Over 100 years
• 100% recyclable
• High stiffness due to high density and E-modulus
• Triple-lip seal, tested up to 13 bar according to EN ISO 13259 (Material: SBR, optionally EPDM or NBR)

Source: Gebr. Ostendorf Kunststoffe GmbH & Co. KG

Flexible pipe connections

CRA17200

Adaptor Coupling CAC 3204

295-320 mm | 144-160 mm

up to 0.6 bar / 8.7 PSI

CRA17201

Adaptor Coupling CAC 3205

295-320 mm | 170-192 mm

up to 0.6 bar / 8.7 PSI

CRA17206

Adaptor Coupling CAC 3207

295-320 mm | 210-235 mm

up to 0.6 bar / 8.7 PSI

CRA17207

Adaptor Coupling CAC 3208

295-320 mm | 240-265 mm

up to 0.6 bar / 8.7 PSI

CRA17208

Adaptor Coupling CAC 3209

295-320 mm | 265-290 mm

up to 0.6 bar / 8.7 PSI

CRA17209

Adaptor Coupling CAC 3351

310-335 mm | 180-205 mm

up to 0.6 bar / 8.7 PSI

CRA17212

Adaptor Coupling CAC 3600

335-360 mm | 295-320 mm

up to 0.6 bar / 8.7 PSI

CRA17215

Adaptor Coupling CAC 3850

360-385 mm | 300-325 mm

up to 0.6 bar / 8.7 PSI

CRA16224

Standard Coupling CSC 320

295-320 mm

up to 2.5 bar / 36.3 PSI

CRA16225

Standard Coupling CSC 335

305-335 mm

up to 2.5 bar / 36.3 PSI

CRA16226

Standard Coupling CSC 345

315-345 mm

up to 2.5 bar / 36.3 PSI

CRA16224FKM

Standard Coupling CSC 320 FKM

295-320 mm

up to 2.5 bar / 36.3 PSI

CRA16225FKM

Standard Coupling CSC 335 FKM

305-335 mm

up to 2.5 bar / 36.3 PSI

CRA16903

Standard Coupling CSC XL 320

295-320 mm

up to 2.5 bar / 36.3 PSI

CRA16904

Standard Coupling CSC XL 335

305-335 mm

up to 2.5 bar / 36.3 PSI

CRA16905

Standard Coupling CSC XL 345

315-345 mm

up to 2.5 bar / 36.3 PSI

Special products

CRA15769

Outside End Cap CEC 315

300-315 mm

up to 0.6 bar / 8.7 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.