Alphacan Omniplast - Primus HL SN12 (Wastewater)
Unfortunately, you cannot purchase this item from us.
Crassus provides this piping system purely for informational purposes within the context of the Pipe Lexicon.

Dimension
Pipe end
Properties
Material category Plastic
RXNR 27-5-S
Designation Alphacan Omniplast - Primus HL SN12 (Wastewater)
Manufacturer Omniplast
DN 200
Pipe end Spigot
Material name Hard-PVC (PVC-U)
Color (exterior) Orange
Applications HVAC/MEP Sector, Civil Engineering
Dimensioning
ID (mm) 188
OD (mm) 200
Description

The philosophy of Alphacan Omniplast is to manufacture ready-to-install pipe systems that are smooth inside and out, which can be easily and easily assembled, filled and compacted into a pipeline. Thanks to its high ring stiffness (≥ 12 kN / m²) and longitudinal stiffness and the molded socket, the Primus HL SN 12 pipe system offers extraordinary stability and security with very good assembly capability and simple installation properties. Due to the clear color separation, sewage pipes in clay-brown and rainwater pipes in blue, it is easy to distinguish between sewage and rainwater even after decades of inspection.

PRIMUS HL SN 12 is the full wall high load sewer pipe system according to the standard of the oldest plastic pipe producer in Germany. Due to the complete fulfillment of all requirements of DIN EN 1401-1, Primus HL SN 12 has unlimited building authority approval. As a technically mature standard material in civil engineering, PVC-U has an extraordinarily high chemical resistance and is not attacked by any of the substances that may occur in wastewater.

The material:

Through the consistent use of the highest quality PVC new material and the production-technical know-how of the oldest plastic pipe producer in Germany, the ring stiffness of ≥ 12 kN / m² according to ISO 9969 for all components of the solid wall sewer pipe system Primus HL SN 12 was achieved through an independent technical solution. The material parameters were decidedly improved, but the required amount of material was not increased. Compared to a standard PVC material, for example, the E-module of the Primus HL SN 12 has been increased from around 3000 N / mm² to well over 4000 N / mm²! This significant material improvement in connection with the low creep factor also achieved the corresponding long-term ring stiffness according to DIN 16961. Should any repair work arise, you can fall back on the inexpensive and flexible Crassus range, which is known for its interior and exterior solutions.

Chemical resistance:

As a technically mature standard material in civil engineering, PVC-U has an extraordinarily high chemical resistance and is not attacked by any of the substances that may occur in wastewater. Any biogenic sulfuric acid, mineral oils, fats and fuels that may develop, but also other chemicals such as acids or alkalis, do not damage PVC-U, unlike other known pipe materials.

Connection option to other sewage systems:

Crassus hose adapters, Crassus combi adapters, Crassus adapter couplings, Crassus rubber adapters as well as bends, branches, Crassus end caps and much more.

Pipe repair:

Crassus Pipe Doctor and Crassus Pipe Plaster

Source: Omniplast, Crassus

Flexible pipe connections
CRA17420
Adaptor Coupling CAC 2000
180-200 mm | 130-145 mm
up to 0.6 bar / 8.7 PSI
CRA17421
Adaptor Coupling CAC 2001
180-200 mm | 155-170 mm
up to 0.6 bar / 8.7 PSI
CRA17034
Adaptor Coupling CAC 6000
180-200 mm | 160-180 mm
up to 0.6 bar / 8.7 PSI
CRA17418
Adaptor Coupling CAC 1991
185-210 mm | 100-115 mm
up to 0.6 bar / 8.7 PSI
CRA17422
Adaptor Coupling CAC 2002
185-210 mm | 160-180 mm
up to 0.6 bar / 8.7 PSI
CRA17182
Adaptor Coupling CAC 2154
190-215 mm | 150-165 mm
up to 0.6 bar / 8.7 PSI
CRA17426
Adaptor Coupling CAC 2152
195-215 mm | 100-115 mm
up to 0.6 bar / 8.7 PSI
CRA17183
Adaptor Coupling CAC 2254
200-225 mm | 160-175 mm
up to 0.6 bar / 8.7 PSI
CRA17188
Adaptor Coupling CAC 2356
210-235 mm | 190-215 mm
up to 0.6 bar / 8.7 PSI
CRA17191
Adaptor Coupling CAC 2656
240-265 mm | 190-215 mm
up to 0.6 bar / 8.7 PSI
CRA17195
Adaptor Coupling CAC 2756
250-275 mm | 200-225 mm
up to 0.6 bar / 8.7 PSI
CRA12035
Adaptor Coupling CAC 9001
260-285 mm | 180-205 mm
up to 0.6 bar / 8.7 PSI
CRA17199
Adaptor Coupling CAC 2956
270-295 mm | 185-210 mm
up to 0.6 bar / 8.7 PSI
CRA17209
Adaptor Coupling CAC 3351
310-335 mm | 180-205 mm
up to 0.6 bar / 8.7 PSI
CRA16204
Drain Coupling CDC 215
200-215 mm
up to 0.6 bar / 8.7 PSI
CRA16217
Standard Coupling CSC 200
175-200 mm
up to 2.5 bar / 36.3 PSI
CRA16218
Standard Coupling CSC 215
190-215 mm
up to 2.5 bar / 36.3 PSI
CRA16219
Standard Coupling CSC 225
200-225 mm
up to 2.5 bar / 36.3 PSI
CRA17420FKM
Adaptor Coupling CAC 2000 FKM
180-200 mm | 130-145 mm
up to 0.6 bar / 8.7 PSI
CRA16204FKM
Standard Coupling CDC 215 FKM
190-215 mm
up to 0.6 bar / 8.7 PSI
CRA16217FKM
Standard Coupling CSC 200 FKM
175-200 mm
up to 2.5 bar / 36.3 PSI
CRA16218FKM
Standard Coupling CSC 215 FKM
190-215 mm
up to 2.5 bar / 36.3 PSI
CRA16900
Standard Coupling CSC XL 225
200-225 mm
up to 2.5 bar / 36.3 PSI
CRA17422
Adaptor Coupling CAC 2002
185-210 mm | 110-125 mm
up to 0.6 bar / 8.7 PSI
CRA17422
Adaptor Coupling CAC 2002
185-210 mm | 144-160 mm
up to 0.6 bar / 8.7 PSI
CRA17191
Adaptor Coupling CAC 2656
195-220 mm | 155-170 mm
up to 0.6 bar / 8.7 PSI
Special products
CRA18762
Outside End Cap CEC 215
200-215 mm
up to 0.6 bar / 8.7 PSI
CRA18629
Inside End Cap CSV 200
180-205 mm | 1 mm
up to 0.5 bar / 7.3 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.