Crassus - be smart. be a Problemlöser.

Material category	Plastic
RXNR	10-9-S
Designation	Geberit - Silent-PP
Manufacturer	Geberit
DN	90
Pipe end	Spigot
Material name	Polypropylene, PP-MD, PP-Copolymer
Color (exterior)	Black
Applications	HVAC/MEP Sector, Drainage

ID (mm)	83.8
OD (mm)	90
Wall thickness (mm)	3.1

The new Geberit waste water plug-in system Silent-PP is ideal for quick, economical and sound-optimized installation of house drainage. The Geberit Silent-PP drainage system can be used consistently in single and two-family houses as well as in multi-storey residential buildings, taking into account the building situation and the required noise levels.

The Geberit Silent-PP consists of robust, mineral-reinforced three-layer pipes. Due to their small size, they make it possible to install the entire sewage system without long sleeves. The high ring rigidity of the system pipes and the proven EPDM lip seals in the sleeves keep the sewage system reliably and permanently tight. Pipes and fittings can also be processed at low temperatures thanks to the cold-impact resistant materials. The high UV resistance also enables economical storage outdoors for a short time. All fittings have a 30 degree mark for quick and easy alignment. The correct insertion depth is indicated by a visual check via a simple stop

The system can be used both inside buildings and buried underground within the building structure (application code "BD" - Building / Drainage) based on DIN EN 1451-1. Silent-PP pipes and fittings are approved by the DIBt under the approval number Z-42.1-432. The system must not be subjected to pressure and therefore must not be used for roof drainage with pressure flow (Pluvia). Geberit Silent-PP may be used for internal rainwater pipes up to a maximum pressure load of 500 hPa (0.5 bar / 5 m geodetic height).

Areas of application

- Domestic sewage

- connecting cables

- Downpipes

- rainwater pipes

- ventilation ducts

- manifolds

- Cast-in pipes

Source: Geberit Vertriebs GmbH

Flexible pipe connections

CRA10085

Pipe Reducer CGA 105 | 90

105 mm | 90 mm

up to 0.5 bar / 7.3 PSI

CRA10016

Multi Pipe Reducer CKA 96/83 | 75/50

96 / 83 mm | 75 / 50 mm

up to 0.5 bar / 7.3 PSI

CRA10014

Multi Pipe Reducer CKA 100-105 | 90/75

100-105 mm | 90 / 75 mm

up to 0.5 bar / 7.3 PSI

CRA11017

Plug Adaptor CSA 070

69-75 mm | 73-85 mm

up to 0.5 bar / 7.3 PSI

CRA10009

Pipe Reducer CMA 110 | 90 (Black)

110 mm | 90 mm

up to 0.5 bar / 7.3 PSI

CRA12049

Adaptor Coupling CAC 0894

75-90 mm | 53-64 mm

up to 0.6 bar / 8.7 PSI

CRA12031

Adaptor Coupling CAC 0923

82-92 mm | 48-56 mm

up to 0.6 bar / 8.7 PSI

CRA12032

Adaptor Coupling CAC 0924

82-92 mm | 60-68 mm

up to 0.6 bar / 8.7 PSI

CRA12052

Adaptor Coupling CAC 1155

100-116 mm | 75-90 mm

up to 0.6 bar / 8.7 PSI

CRA12040

Adaptor Coupling CAC 1221

110-122 mm | 80-95 mm

up to 0.6 bar / 8.7 PSI

CRA12056

Adaptor Coupling CAC 1361

121-136 mm | 80-95 mm

up to 0.6 bar / 8.7 PSI

CRA14027

Drain Coupling CDC 095

80-95 mm

up to 0.6 bar / 8.7 PSI

CRA14036

Standard Coupling CSC 095

80-95 mm

up to 2.5 bar / 36.3 PSI

CRA11022

Plug Adaptor CSA 090

73-90 mm | 79-86 mm

up to 0.5 bar / 7.3 PSI

CRA12040FKM

Adaptor Coupling CAC 1221 FKM

110-122 mm | 80-95 mm

up to 0.6 bar / 8.7 PSI

CRA14027FKM

Standard Coupling CDC 095 FKM

80-95 mm

up to 0.6 bar / 8.7 PSI

CRA12026

Adaptor Coupling CAC 0893

75-90 mm | 40-50 mm

up to 0.6 bar / 8.7 PSI

CRA14057

Drain Coupling CDC 098

85-100 mm

up to 0.6 bar / 8.7 PSI

CRA14058

Standard Coupling CSC 098

85-100 mm

up to 2.5 bar / 36.3 PSI

CRA14036FKM

Standard Coupling CSC 095 FKM

80-95 mm

up to 2.5 bar / 36.3 PSI

Special products

CRA15072

Flexible Branch CFA 090 (78-90, 3'')

78-90 mm

up to 0.6 bar / 8.7 PSI

CRA15068

Flexible Bend CFB 090 (90°, 78-90, 3'')

78-90 mm

up to 0.6 bar / 8.7 PSI

CRA15076

Outside End Cap CEC 092

82-92 mm

up to 0.6 bar / 8.7 PSI

CRA18639

Inside End Cap CSV 80 PVC

70-87 mm | 1/2 mm

up to 0.5 bar / 7.3 PSI

CRA18640

Inside End Cap CSV 90 PVC

83-97 mm | 1/2 mm

up to 0.5 bar / 7.3 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.