Dueker - MLetec
Unfortunately, you cannot purchase this item from us.
Crassus provides this piping system purely for informational purposes within the context of the Pipe Lexicon.

Dimension
Pipe end
Properties
Material category Metal
RXNR 50-8-S
Designation Dueker - MLetec
Manufacturer Düker, wird nicht mehr hergestellt
DN 200
Pipe end Spigot
Material name Cast Iron
Color (exterior) Blue
Applications Civil Engineering, HVAC/MEP Sector, Industry, Drainage
Dimensioning
ID (mm) 200
OD (mm) 210
Wall thickness (mm) 5
Flexible pipe connections
CRA17418
Adaptor Coupling CAC 1991
185-210 mm | 100-115 mm
up to 0.6 bar / 8.7 PSI
CRA17422
Adaptor Coupling CAC 2002
185-210 mm | 160-180 mm
up to 0.6 bar / 8.7 PSI
CRA17182
Adaptor Coupling CAC 2154
190-215 mm | 150-165 mm
up to 0.6 bar / 8.7 PSI
CRA17426
Adaptor Coupling CAC 2152
195-215 mm | 100-115 mm
up to 0.6 bar / 8.7 PSI
CRA17183
Adaptor Coupling CAC 2254
200-225 mm | 160-175 mm
up to 0.6 bar / 8.7 PSI
CRA17184
Adaptor Coupling CAC 2352
210-235 mm | 110-122 mm
up to 0.6 bar / 8.7 PSI
CRA17185
Adaptor Coupling CAC 2353
210-235 mm | 121-136 mm
up to 0.6 bar / 8.7 PSI
CRA17186
Adaptor Coupling CAC 2354
210-235 mm | 144-160 mm
up to 0.6 bar / 8.7 PSI
CRA17187
Adaptor Coupling CAC 2355
210-235 mm | 170-192 mm
up to 0.6 bar / 8.7 PSI
CRA17188
Adaptor Coupling CAC 2356
210-235 mm | 190-215 mm
up to 0.6 bar / 8.7 PSI
CRA17191
Adaptor Coupling CAC 2656
240-265 mm | 190-215 mm
up to 0.6 bar / 8.7 PSI
CRA17193
Adaptor Coupling CAC 2657
240-265 mm | 210-235 mm
up to 0.6 bar / 8.7 PSI
CRA17195
Adaptor Coupling CAC 2756
250-275 mm | 200-225 mm
up to 0.6 bar / 8.7 PSI
CRA17197
Adaptor Coupling CAC 2907
265-290 mm | 210-235 mm
up to 0.6 bar / 8.7 PSI
CRA17199
Adaptor Coupling CAC 2956
270-295 mm | 185-210 mm
up to 0.6 bar / 8.7 PSI
CRA17206
Adaptor Coupling CAC 3207
295-320 mm | 210-235 mm
up to 0.6 bar / 8.7 PSI
CRA16204
Drain Coupling CDC 215
200-215 mm
up to 0.6 bar / 8.7 PSI
CRA16205
Drain Coupling CDC 225
210-225 mm
up to 0.6 bar / 8.7 PSI
CRA16218
Standard Coupling CSC 215
190-215 mm
up to 2.5 bar / 36.3 PSI
CRA16219
Standard Coupling CSC 225
200-225 mm
up to 2.5 bar / 36.3 PSI
CRA16204FKM
Standard Coupling CDC 215 FKM
190-215 mm
up to 0.6 bar / 8.7 PSI
CRA16218FKM
Standard Coupling CSC 215 FKM
190-215 mm
up to 2.5 bar / 36.3 PSI
CRA16900
Standard Coupling CSC XL 225
200-225 mm
up to 2.5 bar / 36.3 PSI
CRA17422
Adaptor Coupling CAC 2002
185-210 mm | 110-125 mm
up to 0.6 bar / 8.7 PSI
CRA17422
Adaptor Coupling CAC 2002
185-210 mm | 144-160 mm
up to 0.6 bar / 8.7 PSI
CRA17191
Adaptor Coupling CAC 2656
195-220 mm | 155-170 mm
up to 0.6 bar / 8.7 PSI
Special products
CRA18762
Outside End Cap CEC 215
200-215 mm
up to 0.6 bar / 8.7 PSI
CRA18629
Inside End Cap CSV 200
180-205 mm | 1 mm
up to 0.5 bar / 7.3 PSI

Important: All brand names and trademarks mentioned on this website are the property of their respective owners. The mention of these names and designations is for informational purposes only and does not imply any cooperation or partnership with the respective manufacturers (nominative use). The information and descriptions provided are for general overview purposes and do not constitute binding product advice or recommendation. Despite careful research, no guarantee is given for the completeness, accuracy, or timeliness of the content. All images shown (product images, graphics, etc.) were created by Crassus GmbH & Co. KG or recreated for demonstration purposes. They may differ from the original product. No liability is accepted for material or immaterial damages caused by the use or non-use of the information provided or by the use of incorrect or incomplete information. If manufacturer texts or information are summarized or quoted in our own words, this is done in a manner that respects the copyrights of the respective rights holders. Further use of the content published here requires our express consent and, if necessary, the approval of the respective rights holder.